Method for reducing probability of burning nozzle of digital printing machine

The digital printing machine companies have always been the digital printing machine as the company's most important core machine, and the nozzle as the core component of the digital printing machine is also a great need to cherish. As the core component of the core machine, the sprinkler occasionally shows the condition of the burner in daily use.

Generally there are several kinds of burning nozzles
1. The ink has entered the nozzle cable jack.
2. The digital printer is not grounded or has poor grounding.
3. The use of inferior ink.
4. The power supply voltage of the digital printer is unstable.

Today we mainly talk about voltage and ink.

1. There is a certain time interval for each switch on and off, preferably after 5 minutes.

2. It is best to turn off the digital printing machine when changing the nozzle to ensure that there is 20ml of ink inside the nozzle. Can not be too much or too little, the new nozzle ink injection need to pay attention, use a syringe to inject 20ml ink inside. Push the ink when you should gently push, or pull out so that the syringe automatically ink into it. After using a manual pump to draw a little ink, you can't use a paper towel to wipe the nozzle of the nozzle after the magic, you should gently clean the ink on the nozzle of the nozzle, then you should infuse and test all the colors, and then start playing. Illustration.

3. The ink tube must be unblocked and the ink tube must not be folded. There should be no air in the ink tube. The ink in the left ink cartridge connected to the ink tube should not be too small or exceed 2/3 of the ink cartridge.

4 digital printing machine error, such as the current overload or temperature is too high, to see what color is, to immediately turn off the digital printing machine, after the problem is solved, it is best to all check the contact with the nozzle and the chip on the ink . If it is clean, dry it and wait 5 minutes before turning on the digital printer.

As a fine product, the nozzle is a very important accessory of the digital printing machine and it must be taken care of.